Better Barns Hardware
makes Do-It-Yourself Architect Designed Barn Plans, Shed Plans,
Antique Reproduction and Specialty Barn Hardware, Barn Windows, Barn
Trim and Barn Doors.
Sliding Door Hardware
For sliding barn, and also interior doors we have reproduced the old fashioned style antique hardware. We have stayed true to the look while making them stronger and better in the process.
*Please note that fastening hardware for the track is sold separately because every door installation is different including wall and door thickness. We do sell the 4" Hex Lag Bolts item #3018 but check with a professional to see what type of bolts will work for your wall.
A pair of Small Flat Strap Hangers. Made here in Connecticut. Black powder coated steel with stainless steel axle pin. Use with our track and accessories.
A pair of Large Flat Strap Hangers. Made here in Connecticut. Black powder coated steel with stainless steel axle pin. Use with our track and accessories.
One 4' track comes with 5 standoffs and 5 black screws. The track attaches to the wall with the standoffs; the hangers attach to the door and roll along the track.
Lag bolts not included but available; see product #3018.
One 6' Track comes with 7 Standoffs and black screws. The track attaches to the wall with the standoffs; the hangers attach to the door and rolls along the track.
Lag bolts not included but available; see product #3018.
One 8' Track comes with 9 Standoffs and black screws. Use alone or piece several sizes of track together to make the opening that's right for your door.
Lag bolts not included but available; see product #3018.
5/16 x 4" stainless steel black oxide Hex Lag Bolts. Each door application is different, please check with a professional to see if these will be the best choice for installing your doors.
Our Connecticut made stops are for all of our Hangers and Track. They attach easily with a when you install your track and standoff to the wall. Sold as a pair; one for each end of your track to keep the doors from rolling off.
This Adjustable Stop can be used anywhere on our track. Will stop the doors before the last hole or over a bolt. Used for both single and double doors. Sold as a pair.
This is a locking system that will work only on a single sliding door. One piece attaches to the outer wall. The other piece attaches to the inside of the door. Coming together on the side.
An option for locking two doors that slide on the same track and meet in the middle. A pair comes together in the center and your padlock is attached through the slots.
Our own Connecticut made heavy duty latch to keep two sliding doors together where they meet in the center. Convenient to open using the curved hand grip on both doors as handles.
The Safety Bracket is especially good for doors that will receive high traffic and rough handling. All doors with properly installed hardware will not go off the track.
For
hardware, barn plans and barn accessories